Microwave Photonic Channelizer Based on Polarization Multiplexing and Photonic Dual Output Image Reject Mixer

Microwave photonic channelizer based on coherent frequency combs (OFCs) enables processing of ultra-wideband RF signals using low-frequency components. The channel number usually equals to the comb line number of the OFCs and the bandwidth for the microwave input is determined by the frequency spacing of the OFCs. However, the generation of coherent OFCs with large comb lines and large frequency spacing is extremely challenging, limiting greatly the potential of the OFC-based channelizer. In this paper, a microwave photonic channelizer based on polarization multiplexing and photonic dual output image reject mixing is proposed and demonstrated. A broadband signal can be divided into 8 channels using only one optical carrier and a pair of dual-polarization local oscillators (DP-LOs). Each DP-LO has only 2 spectral lines with orthogonal polarization states. In addition, by introducing a pair of OFCs with $N$ comb lines, $8N$ channels can be output. The requirement of the comb line number is efficiently reduced, and the in-band interference is greatly suppressed by introducing the polarization multiplexing and the photonic dual-output image-reject mixing. A proof-of-concept experiment is carried out. An RF signal with 9.6-GHz bandwidth centered at 14 GHz is successfully divided into 8 channels with 1.2-GHz bandwidth, and the in-band interference is effectively suppressed for each channel. In addition, RF signals with 2.4-GHz bandwidth centered at 24.8 and 30.8 GHz are also successfully channelized, respectively.

Abstract licence: CC BY-NC-ND

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.