Commissioning the photoinjector of a gamma-ray light source

The Xian gamma-ray light source (XGLS) is a proposed novel high brightness gamma-ray source based on inverse Compton scattering (ICS) between the high brightness electron and laser beams. The photoinjector of the accelerator is one of the main components that determines the electron beam quality and related gamma-ray parameters [Phys. Rev. Accel. Beams 21, 030701 (2018)PRABCJ2469-988810.1103/PhysRevAccelBeams.21.030701; 20, 080701 (2017)PRABCJ2469-988810.1103/PhysRevAccelBeams.20.080701; 8, 100702 (2005)PRABFM1098-440210.1103/PhysRevSTAB.8.100702]. In order to reduce the risk of this project, a photoinjector including a laser-driven photocathode rf gun, two S-band tubes, and a diagnostic section was constructed and installed from 2016, serving as a pilot plant for the development of the key technologies for the projects. The injector is designed to deliver high quality electron bunches of typically 500 pC charge and ∼120 MeV energy with low emittance and jitter at 10 Hz repetition. Initial system commissioning with an electron beam was finished in the end of 2017, with a goal of a stable 0.6–0.7 mm mrad emittance in a 500-pC bunch clearly demonstrated. In this paper, we report the experimental results and experience obtained in the commissioning, including rf gun, drive laser system, timing and synchronization system, and beam diagnostics.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.