Skip to content
naulon

Not checkedNot checked for notices yet.

Risk on design & installation of drag embedment anchor (DEA) for floating offshore wind turbine (FOWT)

Sangjoon Yoon, Taehwan Joung

Journal of International Maritime Safety, Environmental Affairs, and Shipping · 2022

doi:10.1080/25725084.2022.2154931 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

ABSTRACTIn this paper, the risks related to the selection, design, and installation of drag embedment anchors for floating offshore wind turbine systems were investigated and reviewed. For the anchor design, the contents related to the applied load angle were summarized. When the mooring line is damaged, the change of the applied load angle for the anchor increases the likelihood of subsequent mooring line damage. The uplift angle of the mooring line around seabed were also reviewed. During mooring anchors installation, the simultaneous installation of multiple anchors needs to be carefully checked in advance. The results of inspection after drag anchor installation are still uncertain. In particular, it was pointed out that a sufficient level of ship specifications should be secured as the anchor installation ships.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.