Skip to content
naulon
Not checkedNot checked for notices yet.

Influence of structural-dimensional factor and catalytically active additives of Fe2O3/Cr2O3 in α-Al2O3-based membranes on hydrocarbon dehydrogenation

Valerii Ivanovich Uvarov, Roman Dmitrievich Kapustin, Andrei Olegovich Kirillov and 1 more

Journal of Asian Ceramic Societies · 2021

doi:10.1080/21870764.2021.1920133 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

A porous, catalytically active membrane based on α-Al2O3 powder with ultrafine additives of MgO+SiC+SiO2 and catalytically active components of Cr2O3 + Fe2O3 was synthesized in one stage. Double-sided compacting at P = 70–100 MPa and sintering at T = 1300°C were used. The open porosity of the resulting membrane was 38%, and the pore size was from 1 to 3 µm. The influence of structural-dimensional factors, such as material morphology, porosity and pore size, on the catalytic characteristics of the synthesized membranes was studied. The dependences of the structural-dimensional factors from the particle size of the initial powders, their ratio in the mixture, as well as on the method and pressure of compaction were established. The obtained catalytic membrane was used for dehydrogenation of isoamylenes into isoprene. At T = 600°C, the yield of isoprene was up to ~9%, the selectivity ~20%. The conversion of the isoamylene fraction was 46%. During 6 hours of the experiment, the decrease in the catalytic activity of the system was not observed.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.