Effect of nano-ZnO on mechanical and thermal properties of geopolymer
Z. Zidi, M. Ltifi, Z. Ben Ayadi and 2 more
Journal of Asian Ceramic Societies · 2020
doi:10.1080/21870764.2019.1693682 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this experimental study, we synthesized geopolymer materials with different amounts of nano-ZnO (0.3%, 0.5% and 0.7%). The effects of the nano-ZnO concentration on the mechanical, structural and thermal properties were studied in detail. XRD investigation revealed the formation of a glassy phase in all the samples and a small shift of the intense peak, which confirmed the incorporation of nano-ZnO into the geopolymer matrix. FTIR analyses showed an increase in the geopolymerization after the addition of nano-ZnO to geopolymer paste. The morphology of the inorganic polymers was studied by mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM). The addition of nano-ZnO improved the ultrasonic pulse velocity and increased the compressive strength from 30 to 38 MPa. It was found that the strength reached its maximum value at a critical nano-ZnO concentration of 0.5 at.%. The thermal properties of geopolymer nano-ZnO were also investigated using thermogravimetric analysis (TGA), which showed that the incorporation of nano-ZnO decreased weight loss by the geopolymers. The density and the absorption water were also tested and all the results were discussed.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.