Skip to content
naulon

Not checkedNot checked for notices yet.

Metal frame reinforced bulk metallic glass composites

Zu Li, Meng Zhang, Ning Li and 1 more

Materials Research Letters · 2020

doi:10.1080/21663831.2019.1695684 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Inspired by the aseismic structure of skyscrapers, Ti6Al4V frames with tubular structure were designed, 3D printed and thermoplastic formed with Zr35Ti30Be26.75Cu8.25 bulk metallic glass matrix under ultrasonic vibration, forming sandwich-structured bulk metallic glass composites. The interface characterization between matrix and frame reveals a typical metallurgical bonding. By tuning the geometry of Ti6Al4V frame, the composites manifest an enhanced fracture toughness of 213 MPa m1/2, 2.3 times higher than that of the monolithic bulk metallic glass. Our findings provide a promising route for the development of metallic composites. Highlights Our findings providing a promising route for the fabrication of strong-and-tough BMG composites. Metallurgical bonding was achieved at the interface between BMG matrix and the Ti6Al4V frame. By tuning the geometry of Ti6Al4V frame, the BMG composites exhibited high fracture toughness of about 213 MPa m1/2 and a bending strength of about 1 GPa.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.