In situ resin age assessment using dielectric analysis and resin cure map for efficient vacuum infusion
Jung Hwan Shin, Steven Nutt
Advanced Manufacturing: Polymer & Composites Science · 2020
doi:10.1080/20550340.2020.1834790 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The physical state of epoxy resin designed for vacuum infusion was assessed in situ by immersing a dielectric sensor into the resin pot. The measured ion viscosity of aged resin was directly converted to a degree-of-cure metric using a resin cure map constructed by correlating cure kinetics and dielectric analysis data. Next, an age-adjusted infusion process map was employed to define a nominal infusion window and to identify key process metrics. Finally, process simulations and flow contour maps were used to validate and refine the process map and to guide adjustment of infusion process parameters based on resin age and part size/geometry. The study describes a pathway to more efficient use of aged resin using in situ process diagnostics, cure map design, and process simulation. The methodology employed to evaluate resin age and to adjust process parameters accordingly can be extended to other composite manufacturing processes, including conventional prepreg processing.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.