Online monitoring of surface cracks and delaminations in carbon fiber/epoxy composites using silver nanoparticle based ink
Till Augustin, Danny Grunert, Hauke H. Langner and 2 more
Advanced Manufacturing: Polymer & Composites Science · 2017
doi:10.1080/20550340.2017.1362508 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this study, we present an online-monitoring approach using silver nanoparticle based ink on carbon fiber reinforced plastics (CFRP). After production of CFRP plates in a prepreg autoclave process and printing conductive paths on the material, we investigate the conductive paths of printed silver nanoparticle-based ink on CFRP by light microscopy. Mechanical tests with simultaneous electrical resistance measurements demonstrate the possibility to detect particular modes of failure with samples specifically designed to promote inter-fiber failures and delaminations under bending. Delaminations can be detected and localized inside the material by electrical through-thickness measurements and resistance measurements of the conductive paths allow for surface crack detection.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.