Skip to content
naulon
Not checkedNot checked for notices yet.

Characterizing short-fiber-reinforced composites produced using additive manufacturing

Marcus Ivey, Garrett W. Melenka, Jason. P. Carey and 1 more

Advanced Manufacturing: Polymer & Composites Science · 2017

doi:10.1080/20550340.2017.1341125 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Material extrusion additive manufacturing (MEAM), a sub-branch of three-dimensional (3D) printing is growing in popularity. Test specimens were 3D-printed using commercial polylactic acid (PLA) filament, and PLA filament reinforced with short-carbon fibers (PLA/CF). As-printed specimens and specimens that were annealed at three different temperatures, then subjected to tensile testing. The internal microstructures of the samples were also examined. The effects of the short-carbon fiber fillers on the mechanical properties of 3D-printed PLA were investigated, and the effects of the annealing process on polymer crystallinity and mechanical properties. The annealing process was shown to increase the crystallinity of both sample groups, though no statistically significant effect of annealing on mechanical properties was observed. The tensile properties of the PLA and PLA/CF filaments showed that the addition of carbon fibers to the PLA filament led to a significant increase in elastic modulus of the MEAM samples.

Abstract licence: CC BY-NC

References25

    25 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.