Skip to content
naulon
Not checkedNot checked for notices yet.

Preparation of ZnTe thin films using chemical bath deposition technique

Iman Ahmed Younus, Anwar M. Ezzat, Mohammad M. Uonis

Nanocomposites · 2020

doi:10.1080/20550324.2020.1865712 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Chemical bath deposition was used to prepare thin films of ZnTe. The density of compounds (0.5–2) ml in 50 ml of distilled water, the precipitation time (10–80 min), and the solution temperature during the precipitation process (15–85 °C) have been changed during the preparation of the ZnTe thin films to get the optimal deposition conditions of a semiconductor. The effect of these parameters has been determined by studying the optical properties of the films which included the transmittance and absorbance as a function of the wavelength and energy gap. The energy gap remains constant at about 2.7 eV over all precipitation times for each density of compound. We have also found that the energy gap of the films decreases with increasing solution temperature, reaching approximately 2.9-3eV at 15 °C and decreasing to 2.4 eV at 85 °C.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.