Skip to content
naulon

Not checkedNot checked for notices yet.

A new criterion for defining the failure of a fractured rock mass slope based on the strength reduction method

Yuan Wei, Tan Hanhua, Niu Jiandong and 4 more

Geomatics, Natural Hazards & Risk · 2020

doi:10.1080/19475705.2020.1814428 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In this study, a stability analysis approach for fractured rock mass slopes is proposed by combining the strength reduction method (SRM) with the undirected graph theory (UGT). First, the original shear strength parameters of all the fractures are divided by the same reduction coefficient to generate new shear strength parameters, which are used for numerical simulations of the fractured rock mass slope. Second, the connectivity of the failure fractures is analyzed with a self-developed code, which is developed based on UGT. If no fracture clusters are fully connected from the top of the slope to the toe or free face of the slope, the slope is considered to be stable, and the reduction coefficient is incremented. The above calculation procedures are repeated until there is exactly right a fracture cluster is fully connected (i.e. slope is leaded to critical state). The reduction coefficient that coincides with the critical state is considered as the safety factor of the slope, and the fractured rock mass encompassed by the connected failure fractures is regarded as the unstable part of the slope. Finally, the proposed method is applied to analyze the stability and the potential failure range of a steep slope to verify its validity.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.