Skip to content
naulon
Not checkedNot checked for notices yet.

Preparation and characterisation of PE films of carbon nanotube/polyaniline (PAN) composite mixture

Li Jian, Tian Haobin

Journal of Experimental Nanoscience · 2017

doi:10.1080/17458080.2017.1355571 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Polyaniline (PAN) composites filled with nanotube were prepared by twin-screw extruder in order to study the influence of PE reinforcing effect on the mechanical behaviour of the nanotube/polyaniline (PAN) composites. The mechanical property tests of the composites with and without PE were performed. The tensile and flexural strength of nanotube/polyaniline (PAN) composites with polyethylene (PE) was improved. In conclusion, the addition of PE favoured the improvement of the higher interface strength and so had good effect on improving the tensile and flexural properties of the composites. The dielectric strength was slightly increased with the PE content increasing and then decreased gradually. The hybrid film with 2 wt.% of PE shows the dielectric strength of 199 MV/m, which is about 6% higher than that of nanotube/polyaniline (PAN) film (188 MV/m).

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.