Skip to content
naulon

Not checkedNot checked for notices yet.

Novel powder processing technologies for production of rare-earth permanent magnets

Kenta Takagi, Yusuke Hirayama, Shusuke Okada and 2 more

Science and Technology of Advanced Materials · 2021

doi:10.1080/14686996.2021.1875791 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Post-neodymium magnets that possess high heat resistance, coercivity, and (BH)max are desired for future-generation motors. However, the candidate materials for post-neodymium magnets such as Sm2Fe17N3 and metastable magnetic alloys have certain process-related problems: low sinterability due to thermal decomposition at elevated temperatures, deterioration of coercivity during sintering, and the poor coercivity of the raw powder. Various developments in powder processing are underway with the aim of overcoming these problems. So far, the development of advanced powder metallurgy techniques has achieved Sm2Fe17N3 anisotropic sintered magnets without coercivity deterioration, and advances in chemical powder synthesis techniques have been successful in producing Sm2Fe17N3 fine powders with huge coercivity. The challenge of a new powder process is expected to open the way to realizing post-neodymium magnets.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.