Skip to content
naulon
Not checkedNot checked for notices yet.

An end fire printed monopole antenna based on electromagnetic band gap structure

Yahiea Al Naiemy, Taha A. Elwi, Lajos Nagy

Automatika · 2020

doi:10.1080/00051144.2020.1785783 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In this paper, a moderate gain monopole antenna is proposed for GSM and Wi-Max applications. The antenna structure is constructed from a traditional printed monopole on Roger substrate of 3006 family. To enhance the antenna performance ultimately, an Electromagnetic Band Gap (EBG) layer is introduced to the antenna structure. A numerical analysis is applied based on a Finite Integral Technique (FIT) of CST Microwave Studio (CSTMWS) formulations to characterize the EBG unit cell in terms of S-parameters, dispersion and reflection diagram, as well as the constitutive electromagnetic properties. The antenna performance is tested numerically with and without the EBG structure in terms of S-parameters and radiation patterns. It is found that the proposed antenna provides an excellent matching, S11< −10 dB, at 1.85 and 3.3 GHz with 2.88 dBi and 5.8 dBi gain, respectively. Nevertheless, the Finite Element Method (FEM) based on Ansoft High Frequency Structure Simulator (HFSS) software package is invoked to compute the antenna performance. The antenna structure is fabricated and tested experimentally. Finally, an excellent agreement is found between the obtained numerical results from both software packages and measurements.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.