Skip to content
naulon
Not checkedNot checked for notices yet.

Influence of air exposure duration and a-Si capping layer thickness on the performance of p-BaSi2/n-Si heterojunction solar cells

Ryota Takabe, Suguru Yachi, Weijie Du and 4 more

AIP Advances · 2016

doi:10.1063/1.4961063 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Fabrication of p-BaSi2(20nm)/n-Si heterojunction solar cells was performed with different a-Si capping layer thicknesses (da-Si) and varying air exposure durations (tair) prior to the formation of a 70-nm-thick indium-tin-oxide electrode. The conversion efficiencies (η) reached approximately 4.7% regardless of tair (varying from 12–150 h) for solar cells with da-Si = 5 nm. In contrast, η increased from 5.3 to 6.6% with increasing tair for those with da-Si = 2 nm, in contrast to our prediction. For this sample, the reverse saturation current density (J0) and diode ideality factor decreased with tair, resulting in the enhancement of η. The effects of the variation of da-Si (0.7, 2, 3, and 5 nm) upon the solar cell performance were examined while keeping tair = 150 h. The η reached a maximum of 9.0% when da-Si was 3 nm, wherein the open-circuit voltage and fill factor also reached a maximum. The series resistance, shunt resistance, and J0 exhibited a tendency to decrease as da-Si increased. These results demonstrate that a moderate oxidation of BaSi2 is a very effective means to enhance the η of BaSi2 solar cells.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.