Experimental analysis of process parameters in drilling nimonic C263 alloy under nano fluid mixed MQL environment
Ezilarasan Chakaravarthy, Nagaraj Meenaskshi Sundaram, Kumar A. John Presin and 2 more
Manufacturing Review · 2021
doi:10.1051/mfreview/2020039 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Nimonic C263 is a super alloy and it is difficult to cut. As this alloy possess high proportion of chromium, cobalt, and molybdenum, which fortify the material by solution hardening, which inhibits the dislocation movement, resulting in higher plastic deformation. In this research, an attempt has been made to model, analysis and investigate the machining characteristics such as thrust force, temperature at drill cutting edge, flank wear and surface finish during drilling of this alloy using silver nano fluid mixed Minimum Quantity Lubrication (MQL) environment. Residual stress at various combinations of process parameters was also observed and discussed. RSM based empirical models of the process parameters and optimization of multi response was developed. Thrust force, Temperature at drill cutting edge, surface roughness and tool wear affected by feed rate (percentage of contribution-60%), spindle speed (percentage of contribution-88.63%), spindle speed (percentage of contribution-71.42%) and feed rate (percentage of contribution-67.76%) respectively followed by other parameters.
Abstract licence: CC BY
References16
16 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.