In-situ production of WC-Ni using a laser cladding technique
Skhosane Samuel, Masina Bathusile, Lekoadi Paul and 1 more
MATEC Web of Conferences · 2022
doi:10.1051/matecconf/202237006005 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Metal Matrix Composite (MMC) coatings of Tungsten Carbide (WC) and Nickel (Ni) powder were produced using laser cladding process. A crack free and good metallurgically bonded WC-Ni coating of about 5mm thick produced from varying both laser energy density and percent mixture of Ni and WC. In this study, the microstructure of WC-Ni coatings were characterised using optical microscope (OM), scanning electron microscope (SEM) with EDS, while mechanical properties of the coating were studied using Vickers hardness tester and abrasion wear resistance tester. It was found that the hardness and wear resistance increase as the percentage of WC increases.
Abstract licence: CC BY
References6
6 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.