Developing of experimental combustion boiler with stationary fluidized bed and multifuels combustion
Jadlovec Marek, Honus Stanislav
MATEC Web of Conferences · 2021
doi:10.1051/matecconf/202134500014 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Due to the outdated higher requirements for reducing emissions of harmful substances in the combustion of fossil fuels and waste in particular, more and more research is needed, which will lead to the provision of various alternatives to influence the emerging pollutants into the atmosphere. This study deals with the development of experimental combustion units with a stationary fluidized bed with regulated parameters of primary and secondary air supply, performed fuel supply and flue gas parameters. Combustion is carried out in a bubbling stationary fluidized bed with a height of 100 mm and a diameter of 140 mm. The fluidized bed consists of ST 54 glass sand with a mean grain size of 0.22 mm. The basic purpose of the study is to describe the construction of the experimental unit with verification of its functionality. On the experimental equipment was realized experiments in terms of combustion various types of fuels, whether they are fossil fuels (coal), alternative fuels as straw pellets, sludge from wastewater treatment plants, sludge from paper mills or their combinations. Determination of temperature and pressure along the entire length of the unit is a device equipped with thermocouples and pressure sensors.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.