Skip to content
naulon
Not checkedNot checked for notices yet.

Study on the influence of technological parameters on 3D printing with sla technology

Komjaty Andrei, Wisznovszky (Muncut) Elena Stela, Culda Lavinia Ioana

MATEC Web of Conferences · 2021

doi:10.1051/matecconf/202134301003 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The influence of the technological parameters of the printing through the SLA (Stereolithography) technology is presented. This printing technology is based on the use of a photosensitive resin, which polymerizes in contact with UV rays with a wavelength of 405nm. An Anycubic Photon Mono printer is used, on which parts are printed, in which the dimensional accuracy and the condition of the resulting surfaces will be analyzed. It will study the influence of the polymerization time of the resin (5s - 10s), of the advance step between the successively deposited layers (0.05mm - 0.2mm), as well as the influence of the placement positioning of the reference mark for printing. A Black basic type, monomer with photo-initiator photosensitive resin will be used made by Anycubic,. A Sony alpha 37 DSLR camera with Sony SAL-100M28 100mm F / 2.8 AF Macro lens will be used to capture images for the resulting surfaces.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.