Formation of an optimal cement matrix for vibropress products

Modern approaches to the formation of new generation concretes make it possible to replace part of the fine aggregate with finely ground mineral powders, which are by-products of metallurgical and chemical industries, the construction industry, as well as various substandard quartz sands. In the studies carried out, metallurgical slags (MS), broken glass (BG), dust from gas cleaning of metallurgical production (DGCMP), and ground quartz sand (GQS) were used. The aim of the study is to obtain an optimal flow rate of a hydraulic binder by forming an optimal cement matrix. The dosage of finely ground powders varied in the range of 20-49 % of the portland cement consumption. It has been established that the most acceptable finely ground mineral powders in compositions for the production of vibropress products are: quartz ground sand, metallurgical granulated slag of blast furnace production, gas cleaning dust and ground glass. Powders obtained on the basis of glass scrap can be considered as an additional raw material base in the production of materials for road-building purposes. Operational properties such as water absorption and the rate of concrete curing indicate their prospects. However, the economic costs of collecting, sorting glass, obtaining a powder with a specific surface area of 3000 cm2/g are not reasonable at this point in time.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.