Skip to content
naulon
Not checkedNot checked for notices yet.

Drying of Steaming Maple Timber in Drying Kilns, While Preserving the Color Acquired by the Wood Steaming Process

Dzurenda Ladislav

MATEC Web of Conferences · 2020

doi:10.1051/matecconf/202032804004 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The paper presents a mode for drying steaming maple timber of thickness h = 38 mm from moisture W 1 = 50 % to W 2 = 10 %, while preserving the color of wood obtained by the steaming process. The drying process is divided into two parts. Evaporation of free water from wet wood at drying medium temperatures t d = 35 - 40 °C and evaporation of water from wood below the hygroscopicity limit W ≤ 25 % at drying medium temperatures t d = 70 - 80 °C. Total color difference ΔE* determined by the difference in values on the CIE L*a*b* color space coordinates dried by the proposed mode for steaming maple timber and the reference values ΔE* = 1.03. According to the categorization of wood color changes in thermal processes by work (Cividini et al. (2007), this change belongs to the category of small color changes. A negative aspect of this drying mode is the approx. 25 % increase in timber drying time.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.