Phase transformation and evolution of dislocation structure in the β phase of Ti-17 alloy during hot deformation
Yamanaka K., Mori M., Matsumoto H. and 1 more
MATEC Web of Conferences · 2020
doi:10.1051/matecconf/202032113006 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The hot deformation behavior and microstructural evolution of Ti–5Al–2Sn–2Zr–4Mo–4Cr (Ti-17) alloy in the β-phase field were examined. Hot compression tests were conducted at temperatures ranging from 700 and 1100 °C and strain rates ranging from 10-3 to 1 s-1. The obtained true stress–true strain curves exhibited steady-state flow behavior at temperatures above the β-transus temperature (Tβ ~ 890 °C). The microstructural observations suggested that the dynamic recovery process represents a dominant mechanism for the β-phase of the alloy. In contrast, the flow softening was identified at 700 °C at a strain rate of 10–3 s–1. The formation of fine acicular α microstructures was noticed in such a deformation condition, indicating that dynamic phase transformation can occur in the metastable β-phase during hot deformation. Such a dynamic phase transformation also occurred preferentially at the initial β-grain boundaries as well as sub-boundaries that created within the βmatrix via dynamic recovery. The β-processing conditions were also examined by constructing processing maps based on the dynamic materials model (DMM).
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.