Skip to content
naulon
Not checkedNot checked for notices yet.

Deformation mechanisms and effect of oxygen addition on mechanical properties of Ti-7.5Mo alloy with α” martensite

Ji Xin, Gutierrez-Urrutia Ivan, Emura Satoshi and 1 more

MATEC Web of Conferences · 2020

doi:10.1051/matecconf/202032111059 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Effect of oxygen content as an important interstitial solute on the microstructure and mechanical properties of Ti-7.5Mo alloy was investigated. With increasing the oxygen content, the yielding strength, ultimate tensile strength and Young’s modulus of Ti-7.5Mo-xO (x=0, 0.2, 0.3, 0.4, 0.5) alloys increased, while the elongation showing a decreasing tendency. Solid-solution strengthening by the oxygen atoms has been addressed as the main strengthening mechanism. Ti-7.5Mo-xO (x ≤ 0.3) alloys have been regarded with an excellent combination of high yield strength (~640 MPa) and elongation (~28%), as well as low Young’s modulus (~60 GPa). The deformation microstructure of orthorhombic-α” martensite in Ti-7.5Mo alloy was also investigated by tracking a change in the microstructure of a selected area upon tensile deformation. Deformation twins induced by 5% tensile straining was identified as {112}α”-type I twins, which had not been reported before in α”martensite in β-Ti alloys.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.