Skip to content
naulon
Not checkedNot checked for notices yet.

Microstructures and tensile properties of a high strength β titanium alloy Ti5Al4Zr8Mo7V by near β forging and β-transus forging

Zhu Wenguang, Lei Jia, Sun Qiaoyan and 2 more

MATEC Web of Conferences · 2020

doi:10.1051/matecconf/202032111002 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

A novel high-strength metastable β -Ti alloy Ti-5Al-4Zr-8Mo-7V has been successfully developed by improved Bo-Md map combined with critical Mo equivalent criteria. Near β forging combined with different heat treatments was introduced to tailor the Bi-modal structure. The alloy exhibits good strength-ductility combination with UTS~1390 MPa and El~10% after solution treated (ST) at 800°C followed by 570°C aging. After β-transus forging combined with subsequent heat treatment, an excellent combination of strength UTS~1460MPa and El~10% is achieved which is attributed to the Tri-modal structure consisting of primary α (α p ), sub-micro α rods (α r ) and nano-scale α platelets (α s ). Plastic strain is effectively partitioned in both α p , α r and β matrix during deformation, which results in a more homogeneously strain distribution and improved ductility. Nano-scale distribution of α s effectively block the dislocation motion in β matrix and strengthen the alloy.

Abstract licence: CC BY

References12

    12 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.