Skip to content
naulon
Not checkedNot checked for notices yet.

FEM analysis of steel-concrete composite bridges with encased perforated steel strips

Vaňová Patrícia, Kvočák Vincent, Kožlejová Viktória and 2 more

MATEC Web of Conferences · 2020

doi:10.1051/matecconf/202031000050 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

One of the newest contributions to the science of bridges are steel-concrete composite bridges with encased perforated steel strips. Their main advantages are their low height, low usage of materials and therefore lower cost of the bridge. They are mainly used as short span railway bridges (under 20m of length). Main focus of today researchers and structural engineers in this area is to improve the geometry of the steel strip – and therefore find new types with lower usage of material and higher shear strength. At Technical University of Košice, Faculty of Civil Engineering, several new types have been developed and tested. In order to properly measure the shear strength, the push-out tests had to be carried. They track the dependence between load (typed by loading conditions) and slip. These experiments were performed at Laboratory of Excellent Research in Košice. In this article is closely described software modelling of a strip developed at Faculty of Civil Engineering, the experiments performed as well as the results found.

Abstract licence: CC BY

References1

    1 more reference, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.