Interference of the profiles when meshing internal straight splines with gear shapers
Marinov Svetlin, Alipiev Ognyan, Uzunov Toni
MATEC Web of Conferences · 2019
doi:10.1051/matecconf/201928701015 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The possibilities for cutting internal straight splines with gear shapers by internal meshing, without interference between meshed profiles, are shown in this article. The interference is an undesirable occurrence whereby the straight profile of the splines and the instrumental contour intersect with each other beyond the meshing line. As a result, the shaper teeth cut off a part of the splines’ straight profile and they are made with some defects. The research shows that the undesirable interference depends directly on the parameters of the splined opening and the number of shaper teeth. Also, it is determined that the interference can be avoided by reducing the number of shaper teeth and the height of the splines. Furthermore, the maximum number of shaper teeth for all standard splines for which the interference is absent, are defined in the article. The results are confirmed by computer simulations of the corresponding instrumental meshing.
Abstract licence: CC BY
References14
14 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.