Skip to content
naulon
Not checkedNot checked for notices yet.

Modeling and optimization of the delivery fluctuation of gear pumps

Tsolakis Efstratios, Tzanopoulos Antonios, Vasileiou Georgios and 3 more

MATEC Web of Conferences · 2019

doi:10.1051/matecconf/201928701012 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Presented work aims to minimize the delivery fluctuation of a gear pump through geometrical optimisation of the tooth flank. Therefore, instead of examining various configurations, which would reduce the flow ripple ad hoc, the current study suggests the dependence the delivery fluctuation to the tooth flank profile. Taking into account the secondary derivative of the tooth profile, the optimisation process is able to also affect the secondary delivery fluctuation, which is connected to the compression of the fluid over the meshing cycle. Bezier-Bernstein polynomial curves were used to model the tooth flank in order to satisfy the objective function. A dependency between the total length of the path of contact curve and the flow ripple was found. It is stated in this work that for every design point on a closed path of gear set, there is a threshold on the contact length, over which the resulted flow ripple starts to deviate from the optimum value. That conclusion was used to further enhance the optimisation algorithm. The presented optimum gear profile design was evaluated through a comparative study between every design point and the corresponding solution of the existing state of the art in terms of delivery fluctuation.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.