Fast tooth root load capacity optimization based on improved design of hob geometry
Uelpenich Ray, Tenberge Peter
MATEC Web of Conferences · 2019
doi:10.1051/matecconf/201928701011 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The competitiveness of gearboxes is significantly influenced by their performance ability. Increasing the tooth root load capacity has always been in focus of current research because in case of a failure of the gearwheel due to a tooth root fracture, the complete gearbox fails. This paper presents a new calculation method that enables the optimization of hob geometries within a few minutes so that they lead to reduced stresses in the tooth root fillet of spur gears. This results in reductions of the maximum tooth root stress of 10% and more for most gearwheels. The manufacturing costs for the optimized hob are only influenced slightly. In order to increase the computational speed compared to purely FE-based optimization methods, the present paper shows a method in which the decisive part of the optimization process is based on an analytical equation which are derived by a small number of FE-calculations.
Abstract licence: CC BY
References2
2 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.