Skip to content
naulon
Not checkedNot checked for notices yet.

Design and Implementation of an Intelligent Water Regime Detection System

Dai Weijun, Tang Yanni, Qiu Shijie

MATEC Web of Conferences · 2019

doi:10.1051/matecconf/201926702014 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

An intelligent water regime detection system was designed for water detection. In the designed system, water level is detected by a pressure sensor and water pH is detected by a pH meter. After being processed by the AD chip TLC2543, the data are sent to the MCU via serial communication and the detection result is displayed on OLED screen or Bluetooth mobile phone. The software adopts time-sharing and power-down operation modes, and combines the relay to turn on/off the MCU peripheral circuit to reduce power consumption. The measurement deviations of water level, pH, and voltage were respectively less than 2 mm, 0.1, and 0.01 V and the minimum operating current was less than 6 mA. The low-power, high-precision and intelligent water regime detection is realized by the designed system.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.