Skip to content
naulon
Not checkedNot checked for notices yet.

Analysis of a tram car ride when passing point frog and when entering curve by specific rail geometry

Hauser Vladimír, Gerlici Juraj, Kravchenko Kateryna and 2 more

MATEC Web of Conferences · 2019

doi:10.1051/matecconf/201925403004 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In urban railway environments, the problem of tramcars passing small radius arches appears to be topical. In this regard, the authors proposed that the wheelsets should be complemented on the outer side of the wheels with a second tread of a lower radius, intended exclusively for ride in arches of the track with a radius which the conventional wheelsets cannot even theoretically pass without creep. The complemented wheel tread enters into operation (or out of action) as a result of passing over a specially shaped rail located in the intersections before and behind the small radius arc. In this process, there is a change in the wheel-rail contact location similar to what is commonly used when riding on a facing rail located in the immediate vicinity of the point frog. The paper deals with the comparison of these two cases based on a simulation analysis of vehicle ride. It can be evaluated, that changing the contact point when entering the arc by means of the proposed rails takes place in a more favourable way. It is possible to assume nearly 4 times longer service life of the proposed shaped rail than the one of a frog point.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.