Skip to content
naulon
Not checkedNot checked for notices yet.

The temperature distribution during heating in hot plate welding process

Wałęsa Krzysztof, Malujda Ireneusz, Górecki Jan and 1 more

MATEC Web of Conferences · 2019

doi:10.1051/matecconf/201925402033 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Most of the industrial machines use the belt transmission for the power transfer. These mechanisms often use the round belts with a few millimetres in diameter, which are made of the thermoplastic elastomers, especially the polyurethane. Their production process requires the bonding step, which is often performed by the butt welding, using the hot plate. To design the automatic welding machine in a proper way, the authors analyzed this process. One of the most important parameter which describes the hot plate welding is plasticized distance. Knowledge about its value is necessary to predict the length reduction of the belt during welding and will be used during the quality of the joint rating. To obtain value of this parameter the temperature distribution calculations are needed. The paper shows the results of the analytical calculations of the temperature distribution and their comparison with analyses performed by the FEM implements. Calculations were performed for the thermoplastic elastomer during the heating phase in the hot plate welding process.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.