Skip to content
naulon
Not checkedNot checked for notices yet.

Empirical Modeling of Average Cutting Speed during WEDM of Hastelloy C22

Singh Bhupinder, Misra Joy Prakash

MATEC Web of Conferences · 2018

doi:10.1051/matecconf/201824902003 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Cutting speed (CS) is a key performance measure to achieve optimal utilization of the WEDM process. However, input process parameters of WEDM and combination of wire and workpiece material greatly hamper CS and hence productivity and machining efficiency. Therefore, it is essential to pick the right combination of parameters and wire and workpiece material to obtain better CS. In this paper, four process parameters: Pulse-on time, Pulse-off time, Spark-gap voltage, and Peak current were chosen to develop an empirical model for CS during WEDM of Hastelloy C22 to provide a guideline to the potential users of the technique. This paper describes the response surface methodology (RSM) based mathematical modeling for average cutting speed. Furthermore, analysis of variance (ANOVA) was applied to find out significant process parameters and it was depicted that pulse on time and peak current were the major parameters affecting CS.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.