Skip to content
naulon
Not checkedNot checked for notices yet.

Study on the effect of electrochemical treatment of nicosulfuron wastewater

Zhao Rui, Jiang Wenqiang

MATEC Web of Conferences · 2018

doi:10.1051/matecconf/201823805001 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Nicosulfuron, a kind of sulfonylurea herbicide, because of its high activity and low dosage, has been widely used in corn planting weeding. Electrochemical method was chosen to treat its simulated waste water and the influence factors such as current intensity, plate spacing and electrolyte pH on electrolysis effect were investigated. A double-coated titanium dioxide titanium plate was chosen as the anode accompanied with a single-coated titanium plate as the cathode. The results showed that the removal efficiency of nicosulfuron was the highest when the electrolyte pH=3, the plate spacing is 1.5cm and the current intensity is 0.8A. Under the optimal condition, the removal rate of nicosulfuron reached 86.6% after 7 hours electrolysis. Thus, electrochemical technology might provide a significant method to remove the synthetic organic compounds.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.