Skip to content
naulon
Not checkedNot checked for notices yet.

Numerical study of H2S-H2O-air mixture conversion to hydrogen via activation of air by an electric discharge

Arsentiev Ilya, Savelieva Vera, Titova Nataliya

MATEC Web of Conferences · 2018

doi:10.1051/matecconf/201820900015 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The numerical analysis of H2 production during partial oxidation of H2S–H2O–air in a plug-flow reactor at a rather low temperature (T 0=500 K) was conducted. For the reforming process promotion, the oxidizer (air) was activated by an electrical discharge with different values of reduced electric field E/N and input energy E s. It was shown that a significant hydrogen yield in a flow reactor can be obtained only after mixture ignition. The ignition delay length turned out to be minimal at E/N~4–10 and 120–150 Td, when O2(a1Δg) mole fraction in the discharge products is maximal. If the H2S–H2O–air mixture ignites inside the flow reactor, the H2 mole fraction and its relative yield do not depend on E/N. The relative hydrogen yield increases monotonically with an increase of H2O amount. The specific energy requirement for H2 production in considered process was evaluated.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.