Surface modification of Cr‒Mo steel by new technology using high speed jet in water under ultrasonic irradiation
Ijiri Masataka, Yoshimura Toshihiko
MATEC Web of Conferences · 2018
doi:10.1051/matecconf/201820703023 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this study, to further improve current multifunction cavitation (MFC) techniques, the surface modification of Cr‒Mo steel was further investigated using 1200 W ultrasonic power. In MFC using 1200 W ultrasonic power, the corrosion resistance, and compressive residual stress of the specimens were improved when the processing time was 10 min; however, decarburization occurred at longer processing times, causing these characteristics to worsen. The decarburization that occurs at high ultrasonic outputs may be caused by an increase in the water temperature, and of the heating of the specimen surface.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.