Skip to content
naulon
Not checkedNot checked for notices yet.

Influence of boundary slip layout on the hydrodynamic performance of partially textured journal bearing by CFD method

Tauviqirrahman Mohammad, Muchammad, Akbar Rizky Amanullah and 1 more

MATEC Web of Conferences · 2018

doi:10.1051/matecconf/201820404008 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Modification of the lubricated surface by combining the boundary slip and the texturing has proven to enhance the hydrodynamic performance of bearing. The present work explores the combined effect of boundary slip and texturing varying slip layout on the performance of journal bearing using computational fluid dynamic (CFD) approach. The effect of eccentricity ratio is also of particular interest. The results show that when the boundary slip is located on all edges of textured surface, more enhanced load support by 4% is obtained in comparison with classical (no-slip) textured one. However, in general the results also indicate that introducing the boundary slip with different layouts on partially textured surface does not much affect the hydrodynamic pressure as well as the load support; therefore, the slip-textured bearing shows similar and closer trend to the no-slip textured one. In addition, it is also found that the effect of eccentricity ratio is more influential than the boundary slip in terms of load support.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.