Skip to content
naulon
Not checkedNot checked for notices yet.

Effects of stirring parameters on the rheocast microstructure and mechanical properties of aluminum alloy ADC12

Rasyid Syaharuddin, Arif Effendy, Arsyad Hairul and 1 more

MATEC Web of Conferences · 2018

doi:10.1051/matecconf/201819712004 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In this study, effects of stirring time and stirring speed on the microstructure of semisolid rheocast (SSR) aluminum alloy ADC12 were examined. The research method was done by gravity casting using a metal mold. The aluminum ADC12 slurry is stirred by a mechanical stirrer (round rod stirrer) at 610OC with a variation of speed 0, 250, 300, 350 rpm for 0, 20, 40, 60 seconds. Furthermore, the aluminum slurry of ADC12 is poured on a metal mold with temperature 600OC. The microstructure characteristics were examined by direct observation using optical microscopy, secondary -Al phase dendrite arm spacing, shape factor, and Si eutectic phase were identified. The mechanical properties were investigated by hardness test and tensile test. A short period of stirring below the liquidus temperature to form a non-dendritic structure. The final morphology of the primary particles after a short period of stirring time has little impact as the stirring time increases. The optimal mechanical properties (hardness and tensile strength) were obtained at 20 seconds of stirring time and 300 rpm of stirring rate.

Abstract licence: CC BY

References10

    10 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.