Simulation curves of scooping and digging grab
Tsipurskiy Ilya
MATEC Web of Conferences · 2018
doi:10.1051/matecconf/201819604027 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The article deals with a brief description of the purpose and scope of the exchangeable working equipment on cranes and excavators. It is shown that two-leaf rope grab during the cycle can scoop loose material or excavate the ground with digging. In the latter case, the edge of the leaf is equipped with teeth and the specific mass of the bucket per cubic meter of its capacity should be much heavier than with scooping.. An apparent discrepancy between the curve needed for obtaining the greatest grabbing of loose material or ground, i.e., a geometric curve that does not take into account the operational factors of the process, and its actual curve is revealed. In the case of working on the ground, it is called the trajectory of digging. The introduction of the concept of “simulation curve” is an innovative moment in the work. It means the trajectory that adequately adapts the actual geometry of the scooping trajectory or the digging one. The method of geometric construction of the scooping trajectory and the digging one without operational factors is provided.. The method of constructing adequate simulation curves and calculating the volume of portions of material when scooping or digging is outlined.
Abstract licence: CC BY
References1
1 more reference, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.