Material analysis and characterization of working electrodes of dye-sensitized solar cells
Lai Yeong-Lin, Hsu Hung-Ru, Lai Yeong-Kang and 3 more
MATEC Web of Conferences · 2018
doi:10.1051/matecconf/201818500037 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The aim of this paper is to demonstrate the influence of the TiO2 with different sintered time regarding the performance of photovoltaic characteristics of DSSCs. A layer of TiO2 with a thickness of ~8-10 μm and an area of 0.25 cm2 was prepared by depositing TiO2 nanoparticles paste onto a fluorine-doped tin oxide (FTO) sbustrate by doctor blade technique, followed by sinterring at 450°C with 4 differennt sintering times: 10 min, 20 min, 30 min, and 40 min. The Pt solution was dripped on FTO substrate works as counter electrode. SEM, XRD and I-V curve were conducted for the material analysis. The photovoltaic characteristics were measured under AM 1.5 sunlight simulator. The results reveal that the different sintered time of TiO2 working electrode did affect the photovoltaic conversion efficiency. In conclusion, TiO2 sintered for 30 min yields the highest power conversion efficiency of 6.273%.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.