The effect of thrust force in drilling composite materials using step core-ball drill

Composite materials have gained increasing popularity over the past few decades due to their superior mechanical properties, such as high strength-to-weight ratio, fighting against high temperature and corrosion resistance. The assembly of enormous aeronautical components and structures require the machining of composite materials. Drilling is the most important hole-making process in the final assembly. When drilling composite materials, a number of defects are generating. Delamination caused by drilling thrust has been showed as one of the most problematic defects after drilling composite laminates. With a pressing need for decreased delamination, many studies are turning more and more toward tool geometry and machining parameters. Drilling of composite plates using a step core-ball drill, which is a special drill to improve the chip flow and reduces the thrust force at the exit of hole, is investigated in this study. The experimental results found that the step core-ball drill was efficient in drilling of carbon fiber reinforced plastic (CFRP) and did not produce loading on the drill exit at the proper drilling conditions. The results obtained from this study feeding back for fundamental research efforts could steer future studies on the drilling composite materials in the most promising direction.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.