Skip to content
naulon
Not checkedNot checked for notices yet.

Fatigue life assessment regarding different influences on the HCF/VHCF behavior of a martensitic steel

Milošević Igor, Seisenbacher Benjamin, Winter Gerhard and 2 more

MATEC Web of Conferences · 2018

doi:10.1051/matecconf/201816520004 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Modern applications require a special treatment when the conventional specimen size is much larger than the component size. Additional to that, high sophisticated materials are used for highly loaded components. Often the conventional fatigue limit is exceeded and loads are applied in the VHCF regime. Focus was put on the lifetime calculation and the implementation of investigated fatigue data of a X5CrNiCuNb-16-4 type steel. Two specimen geometries with diameters D7.5=7.5 mm and D2.5=2.5 mm were tested at R=-1, at room temperature and up to 109 cycles to failure. The application of different software tools (FEMFAT, fe-safe) showed several issues based on the current results. Results showed a change of crack initiation mechanism to subsurface crack initiation at approx. 2x106 cycles to failure. The gradient based correction of the reference fatigue data showed a good applicability up to 2x106 cylces. The application of fe-safe allows the flexible modification of S/N parameters over the whole cycle range. The usage of the actual material configuration introduced several important questions regarding the fatigue data and the implementation into lifetime calculation tools.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.