Skip to content
naulon
Not checkedNot checked for notices yet.

Fatigue life improvement of cast ZK60 Mg alloy through low temperature closed-die forging for automotive applications

Karparvarfard SMH., Shaha S.K., Behravesh S.B. and 2 more

MATEC Web of Conferences · 2018

doi:10.1051/matecconf/201816506009 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The influence of low-temperature closed-die forging on the quasi-static and cyclic behaviour of as-cast ZK60 magnesium alloy was investigated. As-cast ZK60 billets were forged at a ram speed of 20 mm/sec and a temperature of 250 °C. While the yield strength of the starting alloy was 139 MPa, the forging process improved the yield strength significantly by ~68% to 234 MPa. Moreover, the stresscontrolled push-pull fatigue tests at the stress amplitudes of 140 MPa to 180 MPa revealed that the fatigue life was enhanced by an order of magnitude. Microstructural analyses besides the texture measurements at different locations of the forged part manifested partial grain refinement and texture modification strengthening mechanisms. It is believed that the fatigue life improvement is achieved in the wake of the grain refinement and the subsequent material strengthening.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.