Skip to content
naulon
Not checkedNot checked for notices yet.

HC-SCR: NOx Reduction using Mn and Cu Catalysts Impregnated in Coconut and Palm Kernel Shell Activated Carbon

Barrabas Sherra Bellina, Baini Rubiyah, Sutan Norsuzailina Mohamed and 5 more

MATEC Web of Conferences · 2017

doi:10.1051/matecconf/20178703004 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The characteristics of catalysts impregnated in coconut shell (CS) and palm kernel shell (PKS) activated carbon were determined as potential precursors of catalysts used in a flue gas denitrification system at low temperature. In this study, Manganese (Mn) and Copper (Cu) with metal loading of 8% were impregnated in the activated carbon (AC) before undergoing low temperature calcination process. The morphological properties of samples was analysed using Scanning Electron Microscopy (SEM) and Brunauer, Emmett and Teller (BET) was used to determine the surface area and pore size of samples. The exhaust gas from a diesel engine at a constant flow rate of 4L/min was passed through in a fixed-bed catalytic reactor containing the catalyst, and the concentration of NOx was measured for temperatures ranging from 150°C to 250°C. It was found that the CS catalysts (CS-Mn and CS-Cu) and PKS catalysts (PKS-Mn and PKS-Cu) have the potential to reduce NOx concentration, and results showed that the metal loading of 8% resulted NOx reduction ranging from ~48% to 64%.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.