Physical Characterization of Palm Fatty Acid Distillate (PFAD) Blends as Biofuel
Mantari M.H.A.R., Hassim H.M., Rahman R.A. and 3 more
MATEC Web of Conferences · 2017
doi:10.1051/matecconf/201713500005 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Palm oil has been accepted to be used as fuel with the introduction of petroleum diesel and Palm Methyl Ester (PME) in 2014. The high cost is the major drawback of PME. Not only PME is derived from an expensive low Free Fatty Acid (FFA) feedstock, the cost to convert FFA to PME through the process of trans esterification and purification of palm oil fatty acid is also expensive. Alternative feedstock of FFA is palm fatty acid distillate (PFAD). PFAD is a by-product of crude palm oil (CPO) refining. It is inedible and a low price palm oil product making it attractive as a feedstock for biofuel. The high viscosity of PFAD can be reduced by blending it with diesel fuel. Five blends of PFAD and diesel blends with 2%, 4%, 6%, 8% and 10% volumetric ratio were produced in this study. The physical properties of the blends such as density, viscosity, surface tension and flash point were determined and the results were compared to the Malaysian Standard for Diesel Fuel (MS123:2014). The results show that all properties of the blends are within the acceptable value for diesel fuel.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.