Combined-hole film cooling with the application of double flow control devices
Hassan Haswira, Abdullah Kamil
MATEC Web of Conferences · 2017
doi:10.1051/matecconf/201713500003 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In the modern gas turbine, film cooling system was applied to the turbine blades to provide thermal protection from extreme turbine inlet temperatures. Recent literature discovers that adding the double flow control device (DFCD) and combining two cylindrical holes (combinedhole) are the ways to further enhance the film cooling performances. In the present simulation work, the influence of DFCD on the combined-hole film cooling was investigated at different blowing ratios. The comparison between two different computational domains of combined-hole film cooling with and without DFCD was further discussed in the present work. The results show that increase the blowing ratio, M rise the overall performance of combined-hole film cooling with and without DFCD. Based on the different computational domain, combined-hole with DFCD has better lateral spread at M = 0.5 and M = 0.75 in comparison with the combined-hole without DFCD. However, due to large counter clockwise vortex produced by the combined-hole with DFCD, unsymmetrical film cooling coverage was formed along the streamwise direction at M = 1.0 and M =1.5. As the conclusion, combined-hole film cooling with DFCD has better performance at M = 0.5 and M = 0.75 while combined-hole film cooling without DFCD has better performance at high blowing ratio of M = 1.0 and M = 1.5.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.