The modification of a node-to-node algorithm for the modelling of beam connections in RFEM and SCIA using the explicit method
Štekbauer Hynek, Vlk Zbyněk
MATEC Web of Conferences · 2017
doi:10.1051/matecconf/201710700060 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The “node-to-node” (NTN) algorithm is one of the simplest and oldest contact discretization methods [1]. It is, therefore, used in cases where a more sophisticated method is not needed. Beam connections between 1D elements are a great example of an area of application of NTN discretization. Each connection is modelled by a hinge at the end of every connected 1D element. The explicit method is important with regard to many linear and non-linear dynamics problems. The central difference method is usually used in the Finite Element Method to solve explicit schemes. This and similar methods suffer significant errors if the time step exceeds the critical time step, which is directly derived from the element stiffness and tends towards zero as connected nodes get closer to each other. This is very inconvenient for NTN contacts, as with them there is usually only a small distance (or even zero distance) between the nodes and a rigid connection in a particular direction. This paper presents a modification that enables hinges that are rigid in a particular direction to be calculated using the explicit method.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.