Skip to content
naulon
Not checkedNot checked for notices yet.

Fracture parameters of concrete after exposure to high temperatures: pilot tests

Šimonová Hana, Halfar Petr, Rozsypalová Iva and 2 more

MATEC Web of Conferences · 2017

doi:10.1051/matecconf/201710700039 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Experimental concrete panels were after an appropriate aging time loaded by high temperatures (550, 600, 800 and 1000 °C) in a furnace intended for fire tests of building materials. These panels were heated according to the standard temperature-time curve according to EN 1991-1-2. One of panels was a reference without temperature load. Test specimens were obtained as cores drilled out from panels after performing fire tests. The cylindrical specimens were provided with a central chevron type notch and subsequently tested in three-point bending fracture test. The load versus displacement (deflection in the middle of span) diagrams were recorded during testing and basic fracture parameters were subsequently evaluated.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.