Skip to content
naulon
Not checkedNot checked for notices yet.

Research on Friction and Wear Performance of TiB2 Based Self-lubricating Ceramic composites

Ding Huagang

MATEC Web of Conferences · 2017

doi:10.1051/matecconf/201710004009 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

TiB2 based self-lubricating ceramic composites with the addition of different content of h-BN were prepared by hot pressing technique and their mechanical properties were tested. Friction and wear experiments are conducted on a MMW – 1A configuration control universal friction and wear testing machine. Friction and wear properties of the ceramic composites under different speed and load were studied. The results show that with the increase of the content of h-BN, the hardness, flexural strength and fracture toughness showed a trend of decrease. When load was fixed, with the increase of rotational speed, the friction coefficient rose and the wear rate were first decreased and then increased. When rotational speed was fixed, the friction coefficient and wear rate first decreased and then increased with the increase of load. In nitrogen, the friction coefficient and wear rate of material were higher than those in the air.

Abstract licence: CC BY

References2

    2 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.