Skip to content
naulon
Not checkedNot checked for notices yet.

Cross dies forging: A new method to reduce forging force & price up to 80% thanks to FEM method

Mansouri Hamid, Mohajerani Ahmad Nasri

MATEC Web of Conferences · 2016

doi:10.1051/matecconf/20168009001 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Purpose of this article was to introduce a new method of forging which is called “Cross Die Forging”. In this method, the required force (load) is reduced to the greatest possible degree through elimination of flash channel; however, this would also decrease the positive effect of flash channel, namely filling the gaps and pores within the mold. Cross die forging procedure provides a way for providing a better preform design which ensures that the mold is filled without allowing the material to enter the flash channel. This method has been invented based on the need to decrease the production costs and to use lower tonnage pressing devices for production of heavy parts. This method is an economical method only for parts that: A) Has at least one plane of symmetry and the two ends that are perpendicular to the symmetry plane are flat; B) Has a weight that makes it impossible to be manufactured by rolling or roll forging processes. Examples of such parts are valve’s body, T-junctions, etc.

Abstract licence: CC BY

References7

    7 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.