Skip to content
naulon
Not checkedNot checked for notices yet.

Design of Cam Mechanism with Negative Radius Roller-Follower

Hsieh Jung-Fa, Hsieh Wen-Chang

MATEC Web of Conferences · 2016

doi:10.1051/matecconf/20167104003 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Cam mechanisms with a negative radius roller-follower allow the design of simple machines capable of exerting remarkably high forces. Furthermore, the concave-convex nature of the contact surface between the cam and the follower results in a low contact stress and the ready formation of a lubricating layer. This paper presents a simple method for the design and analysis of a cam mechanism with a negative radius roller-follower. In the proposed approach, conjugate surface theory is employed to derive a kinematic model of the cam mechanism. Analytical expressions for the pressure angle and principal curvatures of the cam profile are then derived. The validity of the proposed design methodology is demonstrated by machining a cam mechanism having a negative radius rollerfollower with a radius of 100 mm.

Abstract licence: CC BY

References6

    6 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.